+420 596 237 619 info@aeroterm.cz
Home » Products » Products – Wood Finishing » EW Extraction Walls

EW Modular Extraction Walls

Modular extraction walls for manual paint application …

  • automatic exhaust fan switching – energy saving
  • modular construction – many dimensional variants
  • easy filter change
  • option to install a pre-filter to extend the life of the André filter
  • simple design – self-installation possible
  • option to install an additional activated carbon filter
  • ability to increase filtering to G4

Paint mist extraction wall for manual or robot spray paint application. Compatible with water-based, UV-water-based or solvent-based coatings. Equipment contains back wall, against which the spraying is done, side walls and upper wall. The air with oversprayed aerosol is exhausted through the rough filter (Andreae filter) and then through the fine filter (glass fibre).

The mentioned filters separate the overspray from exhausted air, which is led out of the working area. Very simple tool-free filter change. Pre-filter installation ready. This option extends Andreae filter replacement time when using water-based or UV water-based paints. In addition to the usual fixed spray gun holder, the device also includes an extra holder which allows to switch on extraction fan when spray gun is removed. This can save energy especially in winter months. Extraction fan is mounted on a console and can be installed on suitable place in production.

Equipment is delivered disassembled with finished switchboard and wiring. Equipment is designed for installation in space with danger of explosion – zone 2, wall-mounted switchboard and extraction fan must be installed in space without danger of explosion. Silent and safe operation. The equipment is designed and produced to meet requirements of regulations and standards of EU countries regarding the design, running and safety of operation and it has a CE declaration. It is possible to install the activated carbon filter in exhausting system on request. It is also possible to upgrade the system to achieve G4 filtration level. Exhaust pipe between extraction wall and its fan included up to 3m length.

Parameters/Type
Aeroterm EW1HAeroterm EW1VAeroterm EW2Aeroterm EW3Aeroterm EW4
External Dimensions
(W x H x D) [mm]
2100x915x560915x2100x5601830x2100x5602750x2100x5603670x2100x560
Exhaust Pipe Diameter [mm]315315355355500
Installed Power
[kW]
2,52,53,55,56,5
Electrical Connection3 N PE 400 V     
Device ClassificationEx II 3G

Paint mist extraction wall for manual or robot spray paint application. Compatible with water-based, UV-water-based or solvent-based coatings. Equipment contains back wall, against which the spraying is done, side walls and upper wall. The air with oversprayed aerosol is exhausted through the rough filter (Andreae filter) and then through the fine filter (glass fibre).

The mentioned filters separate the overspray from exhausted air, which is led out of the working area. Very simple tool-free filter change. Pre-filter installation ready. This option extends Andreae filter replacement time when using water-based or UV water-based paints. In addition to the usual fixed spray gun holder, the device also includes an extra holder which allows to switch on extraction fan when spray gun is removed. This can save energy especially in winter months. Extraction fan is mounted on a console and can be installed on suitable place in production.

Equipment is delivered disassembled with finished switchboard and wiring. Equipment is designed for installation in space with danger of explosion – zone 2, wall-mounted switchboard and extraction fan must be installed in space without danger of explosion. Silent and safe operation. The equipment is designed and produced to meet requirements of regulations and standards of EU countries regarding the design, running and safety of operation and it has a CE declaration. It is possible to install the activated carbon filter in exhausting system on request. It is also possible to upgrade the system to achieve G4 filtration level. Exhaust pipe between extraction wall and its fan included up to 3m length.

Parameters/Type
Aeroterm EW1HAeroterm EW1V
External Dimensions
(W x H x D) [mm]
2100x915x560915x2100x560
Exhaust Pipe Diameter [mm]315315
Installed Power
[kW]
2,52,5
Electrical Connection3 N PE 400 V     
Device ClassificationEx II 3G
Parameters/Type
Aeroterm EW2Aeroterm EW3Aeroterm EW4
External Dimensions
(W x H x D) [mm]
1830x2100x5602750x2100x5603670x2100x560
Exhaust Pipe Diameter [mm]355355500
Installed Power
[kW]
3,55,56,5
Electrical Connection3 N PE 400 V     
Device ClassificationEx II 3G

Paint mist extraction wall for manual or robot spray paint application. Compatible with water-based, UV-water-based or solvent-based coatings. Equipment contains back wall, against which the spraying is done, side walls and upper wall. The air with oversprayed aerosol is exhausted through the rough filter (Andreae filter) and then through the fine filter (glass fibre).

The mentioned filters separate the overspray from exhausted air, which is led out of the working area. Very simple tool-free filter change. Pre-filter installation ready. This option extends Andreae filter replacement time when using water-based or UV water-based paints. In addition to the usual fixed spray gun holder, the device also includes an extra holder which allows to switch on extraction fan when spray gun is removed. This can save energy especially in winter months. Extraction fan is mounted on a console and can be installed on suitable place in production.

Equipment is delivered disassembled with finished switchboard and wiring. Equipment is designed for installation in space with danger of explosion – zone 2, wall-mounted switchboard and extraction fan must be installed in space without danger of explosion. Silent and safe operation. The equipment is designed and produced to meet requirements of regulations and standards of EU countries regarding the design, running and safety of operation and it has a CE declaration. It is possible to install the activated carbon filter in exhausting system on request. It is also possible to upgrade the system to achieve G4 filtration level. Exhaust pipe between extraction wall and its fan included up to 3m length.

Parameters/Type
Aeroterm EW1H
External Dimensions
(W x H x D) [mm]
2100x915x560
Exhaust Pipe Diameter [mm]315
Installed Power
[kW]
2,5
Electrical Connection3 N PE 400 V
Device ClassificationEx II 3G
Parameters/Type
Aeroterm EW1V
External Dimensions
(W x H x D) [mm]
915x2100x560
Exhaust Pipe Diameter [mm]315
Installed Power
[kW]
2,5
Electrical Connection3 N PE 400 V
Device ClassificationEx II 3G
Parameters/Type
Aeroterm EW2
External Dimensions
(W x H x D) [mm]
1830x2100x560
Exhaust Pipe Diameter [mm]355
Installed Power
[kW]
3,5
Electrical Connection3 N PE 400 V
Device ClassificationEx II 3G
Parameters/Type
Aeroterm EW3
External Dimensions
(W x H x D) [mm]
2750x2100x560
Exhaust Pipe Diameter [mm]355
Installed Power
[kW]
5,5
Electrical Connection3 N PE 400 V
Device ClassificationEx II 3G
Parameters/Type
Aeroterm EW4
External Dimensions
(W x H x D) [mm]
3670x2100x560
Exhaust Pipe Diameter [mm]500
Installed Power
[kW]
6,5
Electrical Connection3 N PE 400 V
Device ClassificationEx II 3G
Accessories

Filter Media

Filters and cartridges for extraction walls, suratin coaters, spraying machines and air conditioning.

Contact Us

Privacy Policy

13 + 12 =