Ultraterm ()HA Hot Air Conveyor Dryer

Hot-air conveyor dryer designed for the safe drying of solvent-based inks printed on different materials. The dryer consists of a loading section, a hot air section and an unloading section with belt drive. The loading section can be equipped with a UV bridge to cure UV inks, the exit section is extended and ready for optional simple installation of the cooling section.

The device operates in a hot-air section with a high-speed, highly turbulent flow, which minimises the size of the dryer and its energy consumption. This concept ensures its high efficiency. Very high accuracy of setting and maintaining the set temperature is guaranteed by the most modern type of PID temperature control with automatic tuning of control parameters. The control system used is characterized by a very fast and accurate rise to the set temperature without overshooting it and a very precise maintenance of the set temperature.

A combination of squirrel cage motor and the frequency invertor for precise velocity control and maintenence-free operation. The belt speed can be changed continuously, actual value in meters per minute is indicated on the display. Highly mechanically resistant Teflon coated fiberglass belt. The printed products are held aerodynamically on the conveyor belt so that there is no risk of damage to the products when passing through the HA section or at high belt speeds. Fumes extraction system included. Switchboard cabinet with control panel, emergency STOP button and main switch of the whole device. Noise isolation, top features, simple operation, attractive design.

The equipment is designed and manufactured to comply with the regulations and standards of the EU countries and is equipped with the CE declaration. The equipment is approved by the State Testing Laboratory and the aspects of safe drying of substances containing explosive and flammable solvents.

Hot-air conveyor dryer designed for the safe drying of solvent-based inks printed on different materials. The dryer consists of a loading section, a hot air section and an unloading section with belt drive. The loading section can be equipped with a UV bridge to cure UV inks, the exit section is extended and ready for optional simple installation of the cooling section.

The device operates in a hot-air section with a high-speed, highly turbulent flow, which minimises the size of the dryer and its energy consumption. This concept ensures its high efficiency. Very high accuracy of setting and maintaining the set temperature is guaranteed by the most modern type of PID temperature control with automatic tuning of control parameters. The control system used is characterized by a very fast and accurate rise to the set temperature without overshooting it and a very precise maintenance of the set temperature.

A combination of squirrel cage motor and the frequency invertor for precise velocity control and maintenence-free operation. The belt speed can be changed continuously, actual value in meters per minute is indicated on the display. Highly mechanically resistant Teflon coated fiberglass belt. The printed products are held aerodynamically on the conveyor belt so that there is no risk of damage to the products when passing through the HA section or at high belt speeds. Fumes extraction system included. Switchboard cabinet with control panel, emergency STOP button and main switch of the whole device. Noise isolation, top features, simple operation, attractive design.

The equipment is designed and manufactured to comply with the regulations and standards of the EU countries and is equipped with the CE declaration. The equipment is approved by the State Testing Laboratory and the aspects of safe drying of substances containing explosive and flammable solvents.