+420 596 237 619 info@aeroterm.cz
Home » Products » Products – Printing » Textile Printing Dryers » FlashTerm CombiSet Dryer

FlashTerm CombiSet Dryer

For flash curing and final drying of textiles during screen printing…

  • a set of FlashTerm 39 Master flash cure unit and Vario Belt conveyor
  • economical solution for flash curing and final drying
  • adjustable drying time
  • adjustable irradiated area
  • thermal power adjustment
  • contactless sensor for heating start
  • adjustable conveyor speed
  • conveyor belt made of mechanical and heat resistant material
  • belt suction, fumes extraction

Set of flash cure unit and conveyor dryer in textile printing. Designed for plastisol and water-based textile inks. The set consists of FLASHTERM 39 Master flash cure dryer and VARIO BELT conveyor with IRCS drying chamber. FLASHTERM 39 Master unit – for flash curing of inks when printing on manual or automatic carousel screen printing presses. It uses short-wave infrared radiation in combination with a controlled flow of hot air. Thanks to its sophisticated design, it can successfully cooperate with virtually any type of carousel. Comfortable control offers the possibility of adjusting the height of the drying head, the choice of drying time (in practice about 2-6 s), the size of the irradiated area (saving energy when printing small motifs), the possibility of setting the temperature. The proximity sensor automatically switches the intermediate dryer on when the print palette arrives.

A set of flash cure unit and a conveyor with drying chamber, gives the possibility of final drying and curing of prints. High performance with maximum energy savings. Infrared radiation is used in combination with hot air flow for curing. High efficiency for plastisol and water paints. The resulting conveyor dryer is equipped with a Heat Stop System, which switches the heating on and off as the product enters the drying chamber, thus significantly saving energy. Teflon-coated fibreglass mesh belt with adjustable speed. Effective thermal insulation, belt suction, fumes extraction. The equipment is designed and manufactured to comply with the regulations and standards of EU countries in terms of construction, operation and operator safety and is equipped with the CE declaration.

Parameters/TypeFlashterm 39 IRCombiSet 620Flashterm 39 IRCombiSet 770
Min. Drying Head Height900 mm
Max. Drying Head Height1 100 mm
Max. Irradiated Area300 x 420 mm
Installed Power9 kW
Time Control – Setting I.2-35 s
Time Control – Setting II.12-210 s
Electric Supply3 N PE 400 V
  
Conveyor Parameters 
Belt Width620 mm770 mm
Conveyor Dimensions900x2100x10501100x2500x1050
Belt Speed0,1 – 7 m/min
Productivity of 500 mm Lenghth Pcs and 30″ Drying175 pcs/hr
Installed Power9,2 kW
Electric Supply3 N PE 400 V

Set of flash cure unit and conveyor dryer in textile printing. Designed for plastisol and water-based textile inks. The set consists of FLASHTERM 39 Master flash cure dryer and VARIO BELT conveyor with IRCS drying chamber. FLASHTERM 39 Master unit – for flash curing of inks when printing on manual or automatic carousel screen printing presses. It uses short-wave infrared radiation in combination with a controlled flow of hot air. Thanks to its sophisticated design, it can successfully cooperate with virtually any type of carousel. Comfortable control offers the possibility of adjusting the height of the drying head, the choice of drying time (in practice about 2-6 s), the size of the irradiated area (saving energy when printing small motifs), the possibility of setting the temperature. The proximity sensor automatically switches the intermediate dryer on when the print palette arrives.

A set of flash cure unit and a conveyor with drying chamber, gives the possibility of final drying and curing of prints. High performance with maximum energy savings. Infrared radiation is used in combination with hot air flow for curing. High efficiency for plastisol and water paints. The resulting conveyor dryer is equipped with a Heat Stop System, which switches the heating on and off as the product enters the drying chamber, thus significantly saving energy. Teflon-coated fibreglass mesh belt with adjustable speed. Effective thermal insulation, belt suction, fumes extraction. The equipment is designed and manufactured to comply with the regulations and standards of EU countries in terms of construction, operation and operator safety and is equipped with the CE declaration.

Parameters/TypeFlashterm 39 IRCombiSet 620
Min. Drying Head Height900 mm
Max. Drying Head Height1 100 mm
Max. Irradiated Area300 x 420 mm
Installed Power9 kW
Time Control – Setting I.2-35 s
Time Control – Setting II.12-210 s
Electric Supply3 N PE 400 V
  
Conveyor Parameters 
Belt Width620 mm
Conveyor Dimensions900x2100x1050
Belt Speed0,1 – 7 m/min
Productivity of 500 mm Lenghth Pcs and 30″ Drying175 pcs/hr
Installed Power9,2 kW
Electric Supply3 N PE 400 V
Parameters/TypeFlashterm 39 IRCombiSet 770
Min. Drying Head Height900 mm
Max. Drying Head Height1 100 mm
Max. Irradiated Area300 x 420 mm
Installed Power9 kW
Time Control – Setting I.2-35 s
Time Control – Setting II.12-210 s
Electric Supply3 N PE 400 V
  
Conveyor Parameters 
Belt Width770 mm
Conveyor Dimensions1100x2500x1050
Belt Speed0,1 – 7 m/min
Productivity of 500 mm Lenghth Pcs and 30″ Drying175 pcs/hr
Installed Power9,2 kW
Electric Supply3 N PE 400 V
Accessories

FlashFan Extraction System

Odor extraction during flashing in textile screen printing.

Optical Pyrometer

Contactless thermometer with laser aiming.

Contact Us

Privacy Policy

10 + 14 =